Rapp-it Pipe Repair Video Presentation

Rapp-it Pipe Repair Bandage Video

Rapp-it Pipe Repair Bandage video presentation.

Small (941kb)
Medium (3118kb)
Large (6978kb)

 

 



Rapp-it Pipe Repair Application Instructions;

Shut down pipes or hoses.
Clean damaged area of the pipe thoroughly, disposing of any foreign bodies.
Clean and roughen pipe surface to help result in a successful repair.
Apply Steel Putty to pipe
Activate pipe repair bandage, by soaking in temperate fresh water for 10 seconds.
The entire contents must be used once the package is opened.
Apply Rapp-it pipe repair bandage around the damaged ares, extending 50mm on either side of the leak.
Ensure the bandage is wrapped tight - tightness of the wrap is very important.
Quickly wrap the bandage firmly until completion.
Continue to apply pressure by hand moulding and squeezing the layers together in a tightening motion.
For the best result, manufacturers recommend the completed application be no less than 10mm in thickness
Allow a minimum of 30 minutes for Rapp-it Bandage to set rock-hard.
   





Pipe Repair Bandage activation
Shut down pipe, soak Rapp-it pipe repair in water for 10 seconds.
Pipe Repair bandage applied over steel putty
Wrap Rapp-it around pipe, over Steel Putty. Tighten firmly.
Completed pipe repair
Allow 30 minutes for Rapp-it pipe repair to set rock hard.

 

Alatas UK Ltd, Unit B, Olympic Park, Low Moor, Bradford BD12 0LP
Tel: +44 1274 699222
Fax: +44 1274 699215
© 2018 Alatas UK Ltd